Types of Electrical Equipment Available for Trucks and Trailers

Posted on

Electrical equipment refers to any machine that is powered by electricity it consists of a variety of electrical components. Trucks and trailers have a lot of electrical equipment to ensure that it functions properly. Electrical equipment available for trucks and trailers are as follows.

The sterling waterproof alternator regulator converts from a constant voltage battery charger to an efficient 4-step progressive constant current battery charger. Because of this improvement in the alternator control system, these regulators dramatically enhance the alternator’s charge rates by between 200 and 2000%, depending on how effective the original system is. The sterling regulator is designed to charge batteries as fast as possible and to their maximum capacity without damage to the batteries or alternators.

The battery charger is another piece of electrical equipment and there are a variety of different chargers on the market. A battery charger provides a relatively small amount of current, only enough to counteract self-discharge of a battery that is idle for a long time. Slow battery chargers may take several hours to complete a charge. High-rate chargers may restore most of the capacity within minutes or less than an hour. Generally it requires monitoring to protect it from overcharging.

Anti-theft solenoids allow you to use a small hidden switch that will prevent the truck from starting. There is no power to the starter from solenoids and this prevents the truck from starting.

Horns are available in a variety of pitches, some high or low and others with and without brackets. A vehicle horn is a sound making device used to warn others of your approach. Cars, trucks, ships, and trains are all required by law in some countries to have horns.

Plugs and Sockets will enable you to make all the necessary connections in your truck and trailer. Electrical plugs and sockets differ in voltage and current rating, shape, size, and type of connectors.

Split charger management ensures that in full-fault condition the product does not exceed 90 degrees. It allows you to charge two batteries at the same time from the same charger without the risk of the loads on either battery discharging the other one.

These are some of the electrical truck and trailer parts that are available. These parts need to be checked regularly to ensure that you replace them before they become too damaged. It is important to take care of your truck and trailer especially if you drive with it on a daily basis.

Leave a Reply

Your email address will not be published. Required fields are marked *